Home › Hydraulic & PTO Repair

Hydraulics · Power take-off

Hydraulic & PTO Repair

Almost everything on a shred truck moves on hydraulic power, and that power comes from the truck engine through the PTO. When either one is weak, leaking or running hot, the whole truck slows down.

How the system works

On a typical shredding truck, a power take-off (PTO) on the transmission drives a hydraulic pump. The pump sends oil through valves to the hydraulic motor that turns the shredder, and to the cylinders that lift bins and, on many trucks, push material or empty the body. Oil returns through filters and a cooler to the reservoir. Plant shredders often use the same parts in a stand-alone hydraulic power unit driven by an electric motor.

Because one pump does so much work, small problems — a partly clogged filter, a weak relief valve, a dirty cooler — show up as slow shredding, heat and lost production.

Hydraulic work we do

  • Pressure and flow testing to find where power is being lost
  • Leak repair: hoses, fittings, seals and O-rings
  • Pump, motor and valve diagnosis, repair or replacement
  • Cylinder resealing and repair (bin lifters, rams, ejectors, doors)
  • Cooler cleaning and fan checks; overheating diagnosis
  • Oil and filter service, contamination checks and fluid sampling
  • Relief and control valve checks to manufacturer settings

PTO and driveline work

  • PTO will not engage, disengages on its own, or engages roughly
  • Engagement controls, switches and wiring
  • Driveshaft, U-joint and slip yoke wear; vibration and noise
  • Alignment and mounting between the PTO and the pump

Simple habits that prevent most hydraulic failures

  1. Check the oil level and look for leaks at the start of every shift.
  2. Change filters on schedule — and sooner if the filter indicator says so.
  3. Keep the cooler fins clean; shredder dust and paper fibers clog them fast.
  4. Watch the oil temperature. Oil that runs hot breaks down and wears pumps.
  5. Look for hoses rubbing on the frame or body, and fix them before they burst.
  6. Grease driveline joints at the interval in your truck's manual.

Read more: Why shred truck hydraulic oil runs hot, and what to check.

Hydraulic leak, heat or power loss?

Related Services

Call (919) 586-1911 Request Service